Knight KP1 Muzzleloader Specifications

Caliber: .50 caliber Barrel: 26” Green Mountain Rifle Barrel, Rifle Grade MS – Camouflaged, 1:28 Twist, .50 caliber Ignition: 209 Full Plastic Jacket and 209 Bare Primer Length And Weight: 43½”, 8 Pounds Length of Pull: 14 1/8” Powder: Black Powder FFg, or industry approved black powder substitute. (Maximum Powder Charge) 150 Grains by Volume,…

Barrel Conversion Instructions

To convert your Knight KP1 among the various barrel options available from Knight Rifles, follow the instructions indicated below. Rimfire to Centerfire Follow all of the centerfire/rimfire disassembly steps and assembly steps, switching out the rimfire barrel for the centerfire barrel. Be sure to switch the firing pin from the top to the bottom hole…

Centerfire Firing Pin and Trigger Disassembly

Turning the receiver and butt stock slightly on its side, locate the trigger group release lever. While gripping the trigger group, push the release lever forward and hold. With a slight rocking motion, remove the trigger group by pulling it out and away from the receiver. Set the trigger group aside. Turn the receiver upside…

Barrel Disassembly Centerfire Cont.

Compress the breach lock release button until you feel that the action is free to open. Open the action by holding onto the receiver and stock and gently pulling downward on the front of the barrel. Hold the receiver and buttstock with the action open and the breach exposed. Grip the extractor with the thumb…

Disassembly and Assembly (Centerfire and Rimfire)

Be sure the rifle is not loaded or primed before disassembly or assembly. Always check the chamber for shells or breech plug for the presence of a priming devise. Using the ramrod, ensure that there is no projectile or powder charge loaded on all muzzleloaders. Study the rifle schematic and acquaint yourself with the different…